Thermodynamics of a 3 — D charged rotating hairy black hole

In this paper, we consider a charged rotating black hole in three dimensions with a scalar charge, and discuss thermodynamics quantities. We find effects of the black hole parameters on the temperature, entropy, free energy, total energy and specific heat. We also investigate the stability of the black hole and study phase transition. We consider the first law of thermodynamics and find that satisfied.     

Grafting of poly[1-(N,N-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] copolymer onto siliceous support for preconcentration and determination of lead (II) in human plasma and environmental samples

A method is reported for surface grafting of polymer containing a functional monomer for metal chelating, poly[1-(N,N-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] (poly(AGE/IDA-co-DMAA) onto silica modified by silylation with 3-mercaptopropyltrimethoxysilane. Monomer 1-(N,N-bis-carboxymethyl)amino-3-allylglycerol (AGE/IDA) was synthesized by reaction of allyl glycidyl ether with iminodiacetic acid. The resulting sorbent has been characterized using FT-IR, elemental analysis, thermogravimetric analysis (TGA), FT-Raman and scanning electron microscopy (SEM) and evaluated for the preconcentration and determination of trace Pb(II) in human biological fluid and environmental water samples. The optimum pH value for sorption of the metal ion was 5.5. The sorption capacity of functionalized resin was 15.06 mg g⁻¹. The chelating sorbent can be reused for 15 cycles of sorption–desorption without any significant change in sorption capacity. A recovery of 96.2% was obtained for the metal ion with 0.5 M nitric acid as eluting agent. The profile of lead uptake by the sorbent reflects good accessibility of the chelating sites in the poly(AGE/IDA-co-DMAA)-grafted silica gel. Scatchard analysis revealed that the homogeneous binding sites were formed in the polymers. The equilibrium adsorption data of Pb(II) by modified resin were analyzed by Langmuir, Freundlich, Temkin and Redlich–Peterson models. On the basis of equilibrium adsorption data the Langmuir, Freundlich and Temkin constants were determined as 0.70, 1.35 and 2.7, respectively at pH 5.5 and 20 °C. Isotherms have also been used to obtain the thermodynamic parameters such as free energy, enthalpy and entropy of adsorption.     

A convenient strategy for the synthesis of 3,5-diaryl-1,2,4-thiadiazoles: oxidative dimerization of arylthioamides using CC–DMSO in PEG-400

Abstract  

An inexpensive and effective preparative protocol for the highly efficient synthesis of structurally diverse 3,5-diaryl-1,2,4-thiadiazoles at ambient temperature with 2,4,6-trichloro-1,3,5-triazine (CC) and DMSO in polyethylene glycol 400 (PEG-400) as solvent is described.     

Inhibitory effects of acetylmelodorinol, chrysin and polycarpol from Mitrella kentii on prostaglandin E₂ and Thromboxane B₂ production and platelet activating factor receptor binding

Acetylmelodorinol, chrysin and polycarpol, together with benzoic acid, benzoquinone and stigmasterol were isolated from the leaves of Mitrella kentii (Bl.) Miq. The compounds were evaluated for their ability to inhibit prostaglandin E? (PGE?) and thromboxane B? (TXB?) production in human whole blood using a radioimmunoassay technique. Their inhibitory effect on platelet activating factor (PAF) receptor binding to rabbit platelet was determined using 3H-PAF as a ligand. Among the compounds tested, chrysin showed a strong dose-dependent inhibitory activity on PGE(2) production (IC?? value of 25.5 μM), which might be due to direct inhibition of cyclooxygenase-2 (COX-2) enzymatic activity. Polycarpol, acetylmelodorinol and stigmasterol exhibited significant and concentration-dependent inhibitory effects on TXB? production with IC?? values of 15.6, 19.1 and 19.4 μM, respectively, suggesting that they strongly inhibited COX-1 activity. Polycarpol and acetylmelodorinol showed strong dose-dependent inhibitory effects on PAF receptor binding with IC?? values of 24.3 and 24.5 μM, respectively.     

Mapping the Monte Carlo scheme to Langevin dynamics: a Fokker-Planck approach

We propose a general method of using the Fokker-Planck equation (FPE) to link the Monte Carlo (MC) and the Langevin micromagnetic schemes. We derive the drift and diffusion FPE terms corresponding to the MC method and show that it is analytically equivalent to the stochastic Landau-Lifshitz-Gilbert (LLG) equation of Langevin-based micromagnetics. Subsequent results such as the time-quantification factor for the Metropolis MC method can be rigorously derived from this mapping equivalence. The validity of the mapping is shown by the close numerical convergence between the MC method and the LLG equation for the case of a single magnetic particle as well as interacting arrays of particles. We also find that our Metropolis MC method is accurate for a large range of damping factors alpha, unlike previous time-quantified MC methods which break down at low alpha, where precessional motion dominates.     

New Measurements Concerning a Non-Resonant Photoactivation Cross Section for 115In

In recent years, several groups have reported measurement of a finite non-resonant photoactivation cross section for ¹¹⁵In. Present evaluations of this same parameter have made use of an irradiation arrangement and detector which differ from those of other groups. Our values for the resonant and non-resonant contribution to the photoactivation cross-section are (1.6±0.3)·10^–28 cm² keV and (4.0±0.9)·10^–32 cm², respectively, comparing favourably with counterpart results by TUSTONIC et al.⁵ of (1.3±0.1)·10^–28 cm² keV and (5.5±0.8)·10^–32 cm².     

New Facile Route to Synthesize Furo[3,2-e][1,2,4]triazolo[4,3-c]pyrimidine and Furo[3,2-e][1,2,4]triazolo[1,5-c]pyrimidine Derivatives

A new facile route for synthesis of 3-(aryl)-8,9-diphenylfuro[3,2-e][1,2,4]triazolo pyrimidines derivative from the same starting material, 2-amino-4,5-diphenylfuran-3-carbonitrile, has been developed through heterocyclization of the corresponding arylidene-hydrazono-5,6-diphenylfuro[2,3-d]pyrimidine and N-(arylmethylene)-4-imino-5,6-diphenylfuro[2,3-d]pyrimidin-3(4H)-amine under refluxing condition with acetic anhydride followed by air oxidation. The products were obtained in good yield with an easy workup along with the purification of products by a nonchromatographic method. This general synthetic procedure can be extended to the preparation of a wide range of isomeric triazoles using 2-amino 3-carbonitrile bifunctional derivatives.     

On resolvable primal spaces

A topological space is called resolvable if it is a union of two disjoint dense subsets, and is n-resolvable if it is a union of n mutually disjoint dense subsets. Clearly a resolvable space has no isolated points. If f is a selfmap on X, the sets A?X with f (A)?A are the closed sets of an Alexandroff topology called the primal topology 𝒫(f ) associated with f. We investigate resolvability for primal spaces (X, 𝒫(f)). Our main result is that an Alexandroff space is resolvable if and only if it has no isolated points. Moreover, n-resolvability and other related concepts are investigated for primal spaces.     

A multivariate quantification of Box‐Behnken design assisted method development and validation of dextromethorphan hydrobromide and desloratadine simultaneously by reverse‐phase HPLC in in‐house syrup formulation

An innovative high‐performance liquid chromatography assay method was developed and validated for quantification of dextromethorphan hydrobromide and desloratadine simultaneously in monophasic liquid formulation by preparing syrup containing 30 mg/5 mL of dextromethorphan hydrobromide and 1.2 mg/mL of desloratadine. The chromatographic severance was executed by gradient solution A and B. The composition of buffer solution A contained 0.05 M monobasic potassium, then 1 mL triethylamine was added to it and the pH was adjusted to 2.3 with orthophosphoric acid. Methanol was used as solution B. The gradient elution was executed with Kromasil C8 (250 mm × 4.6 mm) column having 1.5 mL/min flow rate and 20 µL injection volume with UV‐estimation at 254 nm for dextromethorphan hydrobromide and DES. The present research was planned according to Box‐Behnken design by utilizing design expert software, using four factors such as column temperature (A), flow rate (B), mobile phase–organic phase (C), and pH (D); correspondingly the selected response variables were resolution between A and B, that is, desloratadine and methyl paraben (Y1), tailing of dextromethorphan hydrobromide (Y2), and tailing of desloratadine (Y3). The parameters such as system suitability, linearity, accuracy, precision, robustness, limit of detection, limit of quantitation, and ruggedness were analyzed to validate the developed method in accordance with current regulatory guidelines.     

Copper–acetanilide complexes: synthesis,characterization, crystal structure,computational analysis and their application as heterogeneous catalysts for biodiesel synthesis from frying waste oils

Research on Chemical Intermediates - Novel copper complexes were prepared from acetanilide derivatives and deliberately characterized. The molar ratio obtained was 1:1 through neutral bi-dentate...